Franklin Audio was founded on a couple of key principles: that installed audio should blend seamlessly into your environment and sound amazing. The decision was made from day one to keep things simple, easy to understand and use, all while offering superior quality and value.

This truly resonates with us at Synergy Spaces. The fact that the cost to value ratio for Franklin Audio products is very high, makes this brand even more attractive. Whether new construction, or a retrofit, chances are good that a piece of Franklin Audio gear could end up in your next installation!


Franklin IA150 Amplifier - $250
IA150 Amplifier
Amplifiers today need to be multi-faceted to keep up with the task at hand, and adaptability is the foundation upon which the Franklin Audio IA150 is built. When configured in stereo mode, amplification is provided to a pair of speakers for stereo or surround playback. Select bridge-mono mode and the IA150 is ready to power a center channel speaker, or a subwoofer/tactile transducer when used with the on-board low pass filter. Full-range line-level outputs allow for daisy chaining amplifiers for a multi-room whole house audio system or for bi-amp applications. The IA150’s smaller chassis consumes less space than conventional amplifiers, making placement options virtually limitless.

Specifications: • Measured power output: 2 x 75 watts RMS (into 4 ohms @ less than 0.01% THD) • Signal-to-noise ratio: greater than 100 dB • Class A/B design topology • Input sensitivity: 1 V • Input impedance: 47k ohms • Auto-on sensitivity: 3 mV • Voltage requirement: 120/230 VAC, 60/50 Hz • Dimensions: 5.6″ H x 5.7″ W x 12.8″ D.


Franklin A4012 Multi-Channel Amplifier - $800
A4012 Multi-Channel Amplifier

The Franklin Audio A4012 twelve channel amplifier features a Class-AB output circuit that delivers superior audiophile sound quality and steady performance. Each of your installation’s zones can benefit from the A4012’s clean audio reproduction and excellent functionality. The A4012 can be stacked with other audio components and includes removable ears for mounting in standard audio racks (2RU).

Two common or BUS inputs feed audio signals from standard line-level audio sources to any or all channels. Each of the twelve channels has its own dedicated input and independent level adjustment to provide additional flexibility. By simply flipping a single switch, two channels can be bridged to increase the total power output for that zone. This is helpful when extra power is needed in certain areas.

Specifications: • Rated power output per channel: 40 watts into 8 ohms, 60 watts into 4 ohms (0.09% THD) • Bridged output: 80 watts into 8 ohms (0.30% THD) • Signal to noise ratio: 105 dB A-weighted • Input impedance: 18K ohms • Input sensitivity: 380 mV • Frequency response: 5 Hz – 72 kHz • Channel crosstalk: 80 dB • Dimensions: 16.7″ W x 4″ H x 14.25″ D (tabletop configuration) • Power requirements: 115/230 VAC, 60/50 Hz • Stand-by power rating: 115V, 0.264W • Weight: 38 lbs.


Want to know more about Franklin’s complete line of products? Contact us today!